Feature Requests & Bug Fix Requests. ADD YOURS!
Forum rules
iMacros EOL - Attention!
The renewal maintenance has officially ended for Progress iMacros effective November 20, 2023 and all versions of iMacros are now considered EOL (End-of-Life). The iMacros products will no longer be supported by Progress (aside from customer license issues), and these forums will also no longer be moderated from the Progress side.
Thank you again for your business and support.
Sincerely,
The Progress Team
Before asking a question or reporting an issue:
1. Please review the list of FAQ's.
2. Use the search box (at the top of each forum page) to see if a similar problem or question has already been addressed.
3. Try searching the iMacros Wiki - it contains the complete iMacros reference as well as plenty of samples and tutorials.
4. We can respond much faster to your posts if you include the following information: CLICK HERE FOR IMPORTANT INFORMATION TO INCLUDE IN YOUR POST
iMacros EOL - Attention!
The renewal maintenance has officially ended for Progress iMacros effective November 20, 2023 and all versions of iMacros are now considered EOL (End-of-Life). The iMacros products will no longer be supported by Progress (aside from customer license issues), and these forums will also no longer be moderated from the Progress side.
Thank you again for your business and support.
Sincerely,
The Progress Team
Before asking a question or reporting an issue:
1. Please review the list of FAQ's.
2. Use the search box (at the top of each forum page) to see if a similar problem or question has already been addressed.
3. Try searching the iMacros Wiki - it contains the complete iMacros reference as well as plenty of samples and tutorials.
4. We can respond much faster to your posts if you include the following information: CLICK HERE FOR IMPORTANT INFORMATION TO INCLUDE IN YOUR POST
-
- Posts: 2
- Joined: Mon Apr 11, 2011 2:45 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
BUG: The Stop, Play, Pause buttons are not functioning correctly in 7.2.0.8. When macros end you must press pause even if you never paused just to get the play button to ungrey. Sometimes to pause you must press the button multiple times while in the middle a macro. This is a pretty big bug and I'm surprised it has not been corrected yet. This was introduced with 7.2.0.8. I use Firefox 4. Please fix this soon. It really slows productivity down quite a bit. Thanks,
Tim
Tim
-
- Posts: 39
- Joined: Wed Apr 08, 2009 2:01 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
HTML5 Form Support.
iMacros for Firefox doesn't seem to pickup the <input type='email'> input type.
More HTML5 Input Types;
http://www.w3schools.com/html5/html5_fo ... _types.asp
Regards,
B.
iMacros for Firefox doesn't seem to pickup the <input type='email'> input type.
More HTML5 Input Types;
http://www.w3schools.com/html5/html5_fo ... _types.asp
Regards,
B.
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
This is fixed, please see the following post:leandromsp wrote:There seems to be a bug on version 7.2.0.08.
All my previous recorded "Run everywhere" macros were broken after last update.
I wonder if someone else is facing the same issue. Luckily I had another firefox installation with the previous add-on version and these macros are still working there.
I hope the fix come anytime soon.
Thanks!
http://forum.imacros.net/viewtopic.php?f= ... 688#p37920
Regards,
Tom, iMacros Support
Tom, iMacros Support
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Hello,
It seems in the latest Firefox and Chrome addons it is not possible to record select dropdowns.
Try recording here for example:
http://www.w3schools.com/tags/tryit.asp ... tml_option
I started a separate thread on it
http://forum.imacros.net/viewtopic.php?f=11&t=12822
It seems in the latest Firefox and Chrome addons it is not possible to record select dropdowns.
Try recording here for example:
http://www.w3schools.com/tags/tryit.asp ... tml_option
I started a separate thread on it
http://forum.imacros.net/viewtopic.php?f=11&t=12822
Share your imacros easily http://www.sharemacro.com/imacro-directory
Internet Marketing imacros http://www.sharemacro.com
Internet Marketing imacros http://www.sharemacro.com
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Feature Request - variables with the paths to the Imacros working folders:
It would be great if there was a way to access the paths to the working folders (for macros, datasources, downloads).
For macros the variable could be used to run .js files using the URL command - currently you need to know the entire path if you want to do that, and when running scripts on multiple computers, with different OSs, it means you have to configure each script individually.
For datasources and downloads, it would allow you to access these files directly through javascript, rather than having to open and "read" them line by line with imacros.
Cheers!
It would be great if there was a way to access the paths to the working folders (for macros, datasources, downloads).
For macros the variable could be used to run .js files using the URL command - currently you need to know the entire path if you want to do that, and when running scripts on multiple computers, with different OSs, it means you have to configure each script individually.
For datasources and downloads, it would allow you to access these files directly through javascript, rather than having to open and "read" them line by line with imacros.
Cheers!
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Tom wrote:
Any ideas?
Tom, for some reason, that only works if its a 2 digit date like the 10th or greater... today, the 4th, ADD !VAR1 1 after SET !VAR1 {{!NOW:dd}} produces "14"instead of "5"Try using ADD !VAR1 1. You only use {{ }} around variables, not literal values.
Any ideas?
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Yes, this is due to known issue #569.freeav8 wrote:Tom wrote:
Tom, for some reason, that only works if its a 2 digit date like the 10th or greater... today, the 4th, ADD !VAR1 1 after SET !VAR1 {{!NOW:dd}} produces "14"instead of "5"
Any ideas?
Regards,
Tom, iMacros Support
Tom, iMacros Support
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
You can already do this with the iMacros Scripting Edition as described in this How-To post. I have logged this feature request for iMacros for Firefox as well.jbwocky wrote:Feature Request - variables with the paths to the Imacros working folders:!
Regards,
Tom, iMacros Support
Tom, iMacros Support
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Tom, iOpus wrote:This should be fixed in the next release!tgrendo wrote:To not refresh the image in the savepictureas command in firefox.
Any solution on this yet?
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
This was fixed in 7.2.0.8 with the introduction of the SAVE_ELEMENT_SCREENSHOT event.tgrendo wrote:Tom, iOpus wrote:This should be fixed in the next release!tgrendo wrote:To not refresh the image in the savepictureas command in firefox.
Any solution on this yet?
Regards,
Tom, iMacros Support
Tom, iMacros Support
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Hi there! Any update on this issue? I could really use this fixTom, iOpus wrote:Thanks for reporting this Hennink. I have added this to the list of known issues and logged the issue for further investigation by the development team.Hennink wrote:I get a "RuntimeError: Wrong format of CONTENT value" error when trying to select a value for a dropdown box using a csv file. The strange thing is it does work when I don't use the csv file.
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
This has been fixed and will be available in the 7.2.2.0 release.Hennink wrote:Hi there! Any update on this issue? I could really use this fixTom, iOpus wrote:Thanks for reporting this Hennink. I have added this to the list of known issues and logged the issue for further investigation by the development team.Hennink wrote:I get a "RuntimeError: Wrong format of CONTENT value" error when trying to select a value for a dropdown box using a csv file. The strange thing is it does work when I don't use the csv file.
Regards,
Tom, iMacros Support
Tom, iMacros Support
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Update: This issue is fixed in version 7.2.2.0.Hennink wrote:I get a "RuntimeError: Wrong format of CONTENT value" error when trying to select a value for a dropdown box using a csv file. The strange thing is it does work when I don't use the csv file.
This line works. It selects the second value in the dropbox.Code: Select all
TAG POS=1 TYPE=SELECT FORM=NAME:employeesProfileForm ATTR=ID:ID_DEPTID CONTENT=2
This line doesn't.Code: Select all
TAG POS=1 TYPE=SELECT FORM=NAME:employeesProfileForm ATTR=ID:ID_DEPTID CONTENT={{!COL9}}
{{!COL9}} = "2" in the csv file, so this looks like a bug.
This line does work, but I don't want to use it, since the values in de dropbox change regularly and the order isn't always clear. I have one box where the order is %-3, %-1, %-2, %-4, %-5 for example.Code: Select all
TAG POS=1 TYPE=SELECT FORM=NAME:employeesProfileForm ATTR=ID:ID_DEPTID CONTENT=%-{{!COL9}}
iMacros Version: 7200328
OS: Windows 2003 SP2
Browser: FF 3.6.10
Demo macros work ok
Regards,
Tom, iMacros Support
Tom, iMacros Support
-
- Posts: 3834
- Joined: Mon May 31, 2010 4:59 pm
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Update: This is fixed in iMacros 7.2.2.0.siniy wrote:Sometimes excel saves csv file with a comma at the end of the lines. It happens when first line have more filled columns then the rest.With imacros scriptCode: Select all
Lines,Cells line1, line2, line3,
I always get this errorCode: Select all
VERSION BUILD=7110302 RECORDER=FX SET !DATASOURCE LastComma.csv SET !DATASOURCE_COLUMNS 2 SET !LOOP 2 SET !DATASOURCE_LINE {{!LOOP}} PROMPT {{!COL1}}
http://screencast.com/t/W7Qew1BvKBZACode: Select all
RuntimeError: Invalid DATASOURCE_LINE value: 3, line: 4
Can this be fixed?
Regards,
Tom, iMacros Support
Tom, iMacros Support
Re: Feature Requests & Bug Fix Requests. ADD YOURS!
Is there a setting or preference I am missing that allows the user to not be taken to the "Thanks for updating your extension" page?
If there is no such option or preference, could one be added to the wish list? I mean, FF already asks you if you want to update the extension upon program start, I click "Install Updates", and it does. I would prefer to not have a new tab opened telling me "you've successfully updated your extension... yadda...yadda" Firefox already tells me that in the addons window. Any chance this could be coded in as an option that persists through an update?
PS Please, no need to hear from the "It only happens once" crowd, that is unhelpful.
PPS Sorry for the above, but it seems to be the canned response on many wikis and forums for extensions and I have grown weary of children pretending to be grown up. If such attitudes are not the norm, my apologies.
If there is no such option or preference, could one be added to the wish list? I mean, FF already asks you if you want to update the extension upon program start, I click "Install Updates", and it does. I would prefer to not have a new tab opened telling me "you've successfully updated your extension... yadda...yadda" Firefox already tells me that in the addons window. Any chance this could be coded in as an option that persists through an update?
PS Please, no need to hear from the "It only happens once" crowd, that is unhelpful.
PPS Sorry for the above, but it seems to be the canned response on many wikis and forums for extensions and I have grown weary of children pretending to be grown up. If such attitudes are not the norm, my apologies.