How to Fill the Webpage form content based on another already filled content

Support for iMacros. The iMacros software is the unique solution for automating every activity inside a web browser, for data extraction and web testing.
Forum rules
Before asking a question or reporting an issue:
1. Please review the list of FAQ's.
2. Use the search box (at the top of each forum page) to see if a similar problem or question has already been addressed.
3. Try searching the iMacros Wiki - it contains the complete iMacros reference as well as plenty of samples and tutorials.
4. We can respond much faster to your posts if you include the following information:CLICK HERE FOR IMPORTANT INFORMATION TO INCLUDE IN YOUR POST
Post Reply
jyotirmaya
Posts: 37
Joined: Wed Jul 27, 2016 6:25 pm

How to Fill the Webpage form content based on another already filled content

Post by jyotirmaya » Sat Jun 15, 2019 4:12 pm

I am using Browser Firefox 48.0
iMacros for Firefox 9.0.3
Windows 7 Professional 64-bit Operating system

I am using the below code

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDPlotNo CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:extent CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingYears CONTENT=1
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingMonths CONTENT=0
TAG POS=1 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:CertificateIssue
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAB T=1
REFRESH
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:status_f CONTENT=%F
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:officeType_f CONTENT=%3
TAG POS=3 TYPE=INPUT:RADIO FORM=NAME:fwddatailreport_f ATTR=ID:Id_f
ONDIALOG POS=1 BUTTON=CANCEL CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:fwddatailreport_f ATTR=NAME:Submit
In the web page

Code: Select all

TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
The village CONTENT "EXAMPLE" is already there in the form. The Text EXAMPLE is already filled over there, I want the same text EXAMPLE to automatically fill in the below box

Code: Select all

TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT=EXAMPLE
and also I want it to reflect it in

Code: Select all

CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
As per attached documents applicant belongs to village...................hence certificate may be issued. This is common for all web pages, but the text EXAMPLE will be different from one page to another. hence I want to fill two places based on the ATTR=ID:Village CONTENT based on the content I want to fill ATTR=ID:LRDMouza_RevenueVillage CONTENT and the below ..........portion

As per attached documents applicant belongs to village...................hence certificate may be issued.
chivracq
Posts: 8303
Joined: Sat Apr 13, 2013 1:07 pm
Location: Amsterdam (NL)

Re: How to Fill the Webpage form content based on another already filled content

Post by chivracq » Sat Jun 15, 2019 5:11 pm

jyotirmaya wrote:
Sat Jun 15, 2019 4:12 pm
I am using

Code: Select all

Browser Firefox 48.0
iMacros for Firefox 9.0.3 
Windows 7 Professional 64-bit Operating system
I am using the below code

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDPlotNo CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:extent CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingYears CONTENT=1
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingMonths CONTENT=0
TAG POS=1 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:CertificateIssue
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAB T=1
REFRESH
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:status_f CONTENT=%F
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:officeType_f CONTENT=%3
TAG POS=3 TYPE=INPUT:RADIO FORM=NAME:fwddatailreport_f ATTR=ID:Id_f
ONDIALOG POS=1 BUTTON=CANCEL CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:fwddatailreport_f ATTR=NAME:Submit
In the web page

Code: Select all

TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
The village CONTENT "EXAMPLE" is already there in the form. The Text EXAMPLE is already filled over there, I want the same text EXAMPLE to automatically fill in the below box

Code: Select all

TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT=EXAMPLE
and also I want it to reflect it in

Code: Select all

CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
As per attached documents applicant belongs to village...................hence certificate may be issued. This is common for all web pages, but the text EXAMPLE will be different from one page to another. hence I want to fill two places based on the ATTR=ID:Village CONTENT based on the content I want to fill ATTR=ID:LRDMouza_RevenueVillage CONTENT and the below ..........portion

As per attached documents applicant belongs to village...................hence certificate may be issued.
Not sure if you have a Typo in your Thread Title with "form" and if you mean "Form" indeed, or "from"..., as Words feel a bit like they are "randomly" capitalized... :?
=> if you can correct if it's a Typo...? 8)

But OK, not very clear to me where the "EXAMPLE" comes from...?, the very first time you use/need that Village Name in Line=4 in your Script:

Code: Select all

TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
=> Do you each time have to manually edit your Script with the new Name...?, you don't seem to pull it from a '.CSV' DataSource, or you could use an Input 'PROMPT' to type that Name in the 'PROMPT', store it in a Var and reuse that Var everywhere in your Script where you need it...

Or on the same "Principle", if you don't want to use an Input 'PROMPT', you could still edit your Script manually each time, but you could add an "Easy Access" Section at the beginning of your Script with that Var where you then only need to edit that Var once, stg like:

Code: Select all

VERSION BUILD=9030808 RECORDER=FX

'Easy Access Vars:
SET Village "EXAMPLE"
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
And if that "EXAMPLE" doesn't even come from some User Input but is already present on the Page, then the 'EXTRACT' Mechanism would be able to extract it and store it directly in the same 'Village' Var, and in that case, you wouldn't even need to manually edit your Script each time, before running it... And that would give stg like:

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO

'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
- (F)CIM = (Full) Config Info Missing: iMacros + Browser + OS with all 3 Versions...
- I usually don't even read the Question if that (required) Info is not mentioned...
- Script & URL usually help a lot for a more "educated" Help...
jyotirmaya
Posts: 37
Joined: Wed Jul 27, 2016 6:25 pm

Re: How to Fill the Webpage form content based on another already filled content

Post by jyotirmaya » Sun Jun 16, 2019 1:55 am

Not sure if you have a Typo in your Thread Title with "form" and if you mean "Form" indeed, or "from"..., as Words feel a bit like they are "randomly" capitalized... :?
=> if you can correct if it's a Typo...? 8)
Actually both may be correct, but I have meant it for form, because I am filling a form which is partially filled by a third party
But OK, not very clear to me where the "EXAMPLE" comes from...?, the very first time you use/need that Village Name in Line=4 in your Script:
There is an online application form which is filled by a third party agency such as name fathers name address etc and in that page I have to verify the details by clicking a link verification link and there I have to check whether all the details of the applicant is correct or not based on the documents given by the applicant and based on my enquiry I have to fill the verification form. hence here the word "EXAMPLE" means the village name of the applicant, which is different from one applicant to another hence I have to do the verification form updated manually by entering village name etc that is why I needed the code
And if that "EXAMPLE" doesn't even come from some User Input but is already present on the Page, then the 'EXTRACT' Mechanism would be able to extract it and store it directly in the same 'Village' Var, and in that case, you wouldn't even need to manually edit your Script each time, before running it... And that would give stg like:
Yes the word is already present in the page hence this one is the perfect.

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO

'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...

Thank you so much for the above code its working super :) :) :)
chivracq
Posts: 8303
Joined: Sat Apr 13, 2013 1:07 pm
Location: Amsterdam (NL)

Re: How to Fill the Webpage form content based on another already filled content

Post by chivracq » Sun Jun 16, 2019 2:29 am

jyotirmaya wrote:
Sun Jun 16, 2019 1:55 am
Not sure if you have a Typo in your Thread Title with "form" and if you mean "Form" indeed, or "from"..., as Words feel a bit like they are "randomly" capitalized... :?
=> if you can correct if it's a Typo...? 8)
Actually both may be correct, but I have meant it for form, because I am filling a form which is partially filled by a third party
But OK, not very clear to me where the "EXAMPLE" comes from...?, the very first time you use/need that Village Name in Line=4 in your Script:
There is an online application form which is filled by a third party agency such as name fathers name address etc and in that page I have to verify the details by clicking a link verification link and there I have to check whether all the details of the applicant is correct or not based on the documents given by the applicant and based on my enquiry I have to fill the verification form. hence here the word "EXAMPLE" means the village name of the applicant, which is different from one applicant to another hence I have to do the verification form updated manually by entering village name etc that is why I needed the code
And if that "EXAMPLE" doesn't even come from some User Input but is already present on the Page, then the 'EXTRACT' Mechanism would be able to extract it and store it directly in the same 'Village' Var, and in that case, you wouldn't even need to manually edit your Script each time, before running it... And that would give stg like:
Yes the word is already present in the page hence this one is the perfect.

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO

'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...

Thank you so much for the above code its working super :) :) :)
OK, alright, if the Name of the Village is already displayed on the Page, then extracting it through the 'EXTRACT' Mechanism and storing it in a Var to reuse it further in your Script is the easiest and most logical way to go...

Thanks for the Feedback and neat Follow-up, and I'm glad it works directly... :D
- (F)CIM = (Full) Config Info Missing: iMacros + Browser + OS with all 3 Versions...
- I usually don't even read the Question if that (required) Info is not mentioned...
- Script & URL usually help a lot for a more "educated" Help...
jyotirmaya
Posts: 37
Joined: Wed Jul 27, 2016 6:25 pm

Re: How to Fill the Webpage form content based on another already filled content

Post by jyotirmaya » Sun Jun 16, 2019 2:32 am

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO

'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDPlotNo CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:extent CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingYears CONTENT=1
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingMonths CONTENT=0
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:printprcregistration_f ATTR=NAME:submit
ONDIALOG POS=1 BUTTON=OK CONTENT=
WAIT SECONDS=2
TAB T=1
REFRESH
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...

TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:status_f CONTENT=%F
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:officeType_f CONTENT=%3
TAG POS=3 TYPE=INPUT:RADIO FORM=NAME:fwddatailreport_f ATTR=ID:Id_f
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:fwddatailreport_f ATTR=NAME:Submit
Finally I am using the above code, when I was doing it manually when I was filling the details in TAB 2 after clinking OK here

Code: Select all

ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:printprcregistration_f ATTR=NAME:submit
ONDIALOG POS=1 BUTTON=OK CONTENT=
The tab closes automatically and same happens here but when I was doing manually when the Tab 2 closes the Tab 1 was refreshes automatically but when I am doing it with iMacros it didn't refreshes hence I used REFRESH but I am getting error that "browser.reload is not a function, line: 32 (Error code: -1001)" whats the solution for that ? I need a refresh must there because after filling the verification report and after clicking OK there when the tab closes I get a link inside the Update verification link that the verification report is updated, but when refresh is not made it is showing that the application is forwarded by me without verification.
chivracq
Posts: 8303
Joined: Sat Apr 13, 2013 1:07 pm
Location: Amsterdam (NL)

Re: How to Fill the Webpage form content based on another already filled content

Post by chivracq » Sun Jun 16, 2019 2:55 am

jyotirmaya wrote:
Sun Jun 16, 2019 2:32 am

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO

'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDPlotNo CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:extent CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingYears CONTENT=1
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingMonths CONTENT=0
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:printprcregistration_f ATTR=NAME:submit
ONDIALOG POS=1 BUTTON=OK CONTENT=
WAIT SECONDS=2
TAB T=1
REFRESH
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...

TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:status_f CONTENT=%F
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:officeType_f CONTENT=%3
TAG POS=3 TYPE=INPUT:RADIO FORM=NAME:fwddatailreport_f ATTR=ID:Id_f
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:fwddatailreport_f ATTR=NAME:Submit
Finally I am using the above code, when I was doing it manually when I was filling the details in TAB 2 after clinking OK here

Code: Select all

ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:printprcregistration_f ATTR=NAME:submit
ONDIALOG POS=1 BUTTON=OK CONTENT=
The tab closes automatically and same happens here but when I was doing manually when the Tab 2 closes the Tab 1 was refreshes automatically but when I am doing it with iMacros it didn't refreshes hence I used REFRESH but I am getting error that "browser.reload is not a function, line: 32 (Error code: -1001)" whats the solution for that ? I need a refresh must there because after filling the verification report and after clicking OK there when the tab closes I get a link inside the Update verification link that the verification report is updated, but when refresh is not made it is showing that the application is forwarded by me without verification.
For the Error you are getting, you can first try activating '!ERRORIGNORE'... Sometimes, Scripts will work just fine with '!ERRORIGNORE' even if they would otherwise trigger some "strange" Error...

And instead of using the 'REFRESH' Command, some kind of "Equivalent" is to use 'URL GOTO' with current URL:

Code: Select all

URL GOTO={{!URLCURRENT}}
But it depends a bit on the Site, it's not always exactly the same...

There is also stg a bit "strange" about your 'ONDIALOG' Statements, I had noticed... An 'ONDIALOG' Statement needs to be placed before the ('TAG' or 'EVENT') Statement that will/might trigger it, just like 'ONDOWNLOAD' also...

And also, you are using v9.0.3 for FF, and that Version was a bit buggy... :oops:
v8.9.7 for FF is much more stable, and works also on your FF48. (Both Versions work until FF56, but recommended = FFv55.0.3.)
- (F)CIM = (Full) Config Info Missing: iMacros + Browser + OS with all 3 Versions...
- I usually don't even read the Question if that (required) Info is not mentioned...
- Script & URL usually help a lot for a more "educated" Help...
jyotirmaya
Posts: 37
Joined: Wed Jul 27, 2016 6:25 pm

Re: How to Fill the Webpage form content based on another already filled content

Post by jyotirmaya » Sun Jun 16, 2019 3:15 am

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO
'!ERRORIGNORE'
'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDPlotNo CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:extent CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingYears CONTENT=1
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingMonths CONTENT=0
TAG POS=1 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:CertificateIssue
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:printprcregistration_f ATTR=NAME:submit
ONDIALOG POS=1 BUTTON=OK CONTENT=
WAIT SECONDS=2
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...

TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:status_f CONTENT=%F
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:officeType_f CONTENT=%3
TAG POS=3 TYPE=INPUT:RADIO FORM=NAME:fwddatailreport_f ATTR=ID:Id_f
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:fwddatailreport_f ATTR=NAME:Submit
I have removed the REFRESH, now I am getting error that mm is undefined, line: 33 (Error code: -1001) It was working but now getting error

Code: Select all

TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
This is the line 33
chivracq
Posts: 8303
Joined: Sat Apr 13, 2013 1:07 pm
Location: Amsterdam (NL)

Re: How to Fill the Webpage form content based on another already filled content

Post by chivracq » Sun Jun 16, 2019 3:22 am

jyotirmaya wrote:
Sun Jun 16, 2019 3:15 am

Code: Select all

VERSION BUILD=9030808 RECORDER=FX
'SET !EXTRACT_TEST_POPUP NO
'!ERRORIGNORE'
'Easy Access Vars:
'SET Village "EXAMPLE" // (Extracted from the Page...)
SET Remark_Part_1 "As per attached documents applicant belongs to village "
SET Remark_Part_2 " hence certificate may be issued"

TAG POS=1 TYPE=A ATTR=TXT:Update<SP>Verification<SP>Report
TAG POS=2 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:IsPhotoVerified
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
SET !EXTRACT NULL
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village EXTRACT=TXT
SET Village {{!EXTRACT}}
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDPlotNo CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:extent CONTENT=0
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT={{Village}}
'[...]
'TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:Village CONTENT=EXAMPLE
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:LRDMouza_RevenueVillage CONTENT={{Village}}
'[...]
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingYears CONTENT=1
TAG POS=1 TYPE=INPUT:TEXT FORM=NAME:printprcregistration_f ATTR=ID:ResidingMonths CONTENT=0
TAG POS=1 TYPE=INPUT:RADIO FORM=NAME:printprcregistration_f ATTR=ID:CertificateIssue
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:printprcregistration_f ATTR=NAME:submit
ONDIALOG POS=1 BUTTON=OK CONTENT=
WAIT SECONDS=2
'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...

TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:status_f CONTENT=%F
TAG POS=1 TYPE=SELECT FORM=NAME:fwddatailreport_f ATTR=ID:officeType_f CONTENT=%3
TAG POS=3 TYPE=INPUT:RADIO FORM=NAME:fwddatailreport_f ATTR=ID:Id_f
ONDIALOG POS=1 BUTTON=OK CONTENT=
TAG POS=1 TYPE=INPUT:SUBMIT FORM=NAME:fwddatailreport_f ATTR=NAME:Submit
I have removed the REFRESH, now I am getting error that mm is undefined, line: 33 (Error code: -1001) It was working but now getting error

Code: Select all

TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
This is the line 33
Yeah, but in all Cases, try first with '!ERRORIGNORE'... I'm only mentioning the name of the Command, check the Wiki for the correct Syntax...
- (F)CIM = (Full) Config Info Missing: iMacros + Browser + OS with all 3 Versions...
- I usually don't even read the Question if that (required) Info is not mentioned...
- Script & URL usually help a lot for a more "educated" Help...
jyotirmaya
Posts: 37
Joined: Wed Jul 27, 2016 6:25 pm

Re: How to Fill the Webpage form content based on another already filled content

Post by jyotirmaya » Sun Jun 16, 2019 3:37 am

Yeah, but in all Cases, try first with '!ERRORIGNORE'... I'm only mentioning the name of the Command, check the Wiki for the correct Syntax...
Sorry for that, yes now I am using

Code: Select all

SET !ERRORIGNORE YES
but still the code stops

the code is working to fill this text box

Code: Select all

'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
but when 2nd time whiling filling this one there are some error.

Code: Select all

'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
I am trying to find but not able to find anything
chivracq
Posts: 8303
Joined: Sat Apr 13, 2013 1:07 pm
Location: Amsterdam (NL)

Re: How to Fill the Webpage form content based on another already filled content

Post by chivracq » Sun Jun 16, 2019 3:59 am

jyotirmaya wrote:
Sun Jun 16, 2019 3:37 am
Yeah, but in all Cases, try first with '!ERRORIGNORE'... I'm only mentioning the name of the Command, check the Wiki for the correct Syntax...
Sorry for that, yes now I am using

Code: Select all

SET !ERRORIGNORE YES
but still the code stops

the code is working to fill this text box

Code: Select all

'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
but when 2nd time whiling filling this one there are some error.

Code: Select all

'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
I am trying to find but not able to find anything
OK, yep, now you are using '!ERRORIGNORE' "correctly", ah-ah...! :wink:

And with '!ERRORIGNORE', you are not able to bypass the "browser.reload is not a function, line: 32 (Error code: -1001)" RuntimeError on the 'REFRESH'...? :o
I've never seen that RuntimeError actually... But, hum..., it could be specific to v9.0.3 for FF, and that Version was so buggy, it was never "properly" tested, and many Bugs were probably never even reported, as all "serious" Users quickly reverted to v8.9.7. :shock:

I never used it myself... Only once did I try to install it around FF[55-57] to check/try if by any chance, it might still work on FF57 when v8.9.7 stopped working on FF57 because of the WebExtensions Architecture... :oops:
Same with the "mm is undefined" RuntimeError, I remember many Threads on the Forum about that kind of Error(s) with v9.0.3 for FF.

The stable Version to use is v8.9.7 for FF, not v9.0.3 anyway... :shock:
Both Versions available for Download or Re-Download from the 'iMacros for FF Legacy Versions' Wiki Page... :idea:
- (F)CIM = (Full) Config Info Missing: iMacros + Browser + OS with all 3 Versions...
- I usually don't even read the Question if that (required) Info is not mentioned...
- Script & URL usually help a lot for a more "educated" Help...
jyotirmaya
Posts: 37
Joined: Wed Jul 27, 2016 6:25 pm

Re: How to Fill the Webpage form content based on another already filled content

Post by jyotirmaya » Sun Jun 16, 2019 5:04 am

chivracq wrote:
Sun Jun 16, 2019 3:59 am
jyotirmaya wrote:
Sun Jun 16, 2019 3:37 am
Yeah, but in all Cases, try first with '!ERRORIGNORE'... I'm only mentioning the name of the Command, check the Wiki for the correct Syntax...
Sorry for that, yes now I am using

Code: Select all

SET !ERRORIGNORE YES
but still the code stops

the code is working to fill this text box

Code: Select all

'TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:printprcregistration_f ATTR=ID:Remarks CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
but when 2nd time whiling filling this one there are some error.

Code: Select all

'TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT=As<SP>per<SP>attached<SP>documents<SP>applicant<SP>belongs<SP>to<SP>village<SP>EXAMPLE<SP>hence<SP>certificate<SP>may<SP>be<SP>issued
TAG POS=1 TYPE=TEXTAREA FORM=NAME:fwddatailreport_f ATTR=ID:offRemarks_f CONTENT={{Remark_Part_1}}{{Village}}{{Remark_Part_2}}
'[...] Etc...
I am trying to find but not able to find anything
OK, yep, now you are using '!ERRORIGNORE' "correctly", ah-ah...! :wink:

And with '!ERRORIGNORE', you are not able to bypass the "browser.reload is not a function, line: 32 (Error code: -1001)" RuntimeError on the 'REFRESH'...? :o
I've never seen that RuntimeError actually... But, hum..., it could be specific to v9.0.3 for FF, and that Version was so buggy, it was never "properly" tested, and many Bugs were probably never even reported, as all "serious" Users quickly reverted to v8.9.7. :shock:

I never used it myself... Only once did I try to install it around FF[55-57] to check/try if by any chance, it might still work on FF57 when v8.9.7 stopped working on FF57 because of the WebExtensions Architecture... :oops:
Same with the "mm is undefined" RuntimeError, I remember many Threads on the Forum about that kind of Error(s) with v9.0.3 for FF.

The stable Version to use is v8.9.7 for FF, not v9.0.3 anyway... :shock:
Both Versions available for Download or Re-Download from the 'iMacros for FF Legacy Versions' Wiki Page... :idea:

THANK YOU SO MUCH FOR THE TIMELY HELP AND SUPPORT. I never thought that it could be a version issue, I thought that may be some coding error, I have downloaded v8.9.7 for FF and errors are gone and its working perfectly. Thank you once again. :) :) :) :) :) :) :D
chivracq
Posts: 8303
Joined: Sat Apr 13, 2013 1:07 pm
Location: Amsterdam (NL)

Re: How to Fill the Webpage form content based on another already filled content

Post by chivracq » Sun Jun 16, 2019 5:28 am

jyotirmaya wrote:
Sun Jun 16, 2019 5:04 am
THANK YOU SO MUCH FOR THE TIMELY HELP AND SUPPORT. I never thought that it could be a version issue, I thought that may be some coding error, I have downloaded v8.9.7 for FF and errors are gone and its working perfectly. Thank you once again. :) :) :) :) :) :) :D
Ah...!, lovely...!, good to hear...! :D
- (F)CIM = (Full) Config Info Missing: iMacros + Browser + OS with all 3 Versions...
- I usually don't even read the Question if that (required) Info is not mentioned...
- Script & URL usually help a lot for a more "educated" Help...
Post Reply