Need some very simple help (new to the tool)
Forum rules
iMacros EOL - Attention!
The renewal maintenance has officially ended for Progress iMacros effective November 20, 2023 and all versions of iMacros are now considered EOL (End-of-Life). The iMacros products will no longer be supported by Progress (aside from customer license issues), and these forums will also no longer be moderated from the Progress side.
Thank you again for your business and support.
Sincerely,
The Progress Team
iMacros EOL - Attention!
The renewal maintenance has officially ended for Progress iMacros effective November 20, 2023 and all versions of iMacros are now considered EOL (End-of-Life). The iMacros products will no longer be supported by Progress (aside from customer license issues), and these forums will also no longer be moderated from the Progress side.
Thank you again for your business and support.
Sincerely,
The Progress Team
-
- Posts: 8
- Joined: Tue Apr 26, 2011 1:48 pm
Need some very simple help (new to the tool)
I'm trying to create a simple script, however it isn't selecting the check box fields (then it's supposed to repeat that click event on the following check boxes another 39 times) then proceeding with the script. If anyone can assist, I would greatly appreciate it.
This is in no way complex or difficult, I just need to figure out the proper way to refer to the check box so it is validated for the click event.
Thanks!
Extended Help Information:
I recorded a video showing what I am doing to better help someone with assisting me. The video can be found at:
http://www.jodriscoll.com/DA:L/iMacroHelp/
- The reason I remove the URL when editing the Macro is because it attempts to load up the game page again and if the game isn't fully loaded then the item I am trying to send out will not be unlocked.
- I removed the Form data because this information changes on a daily basis. Instead of relying on it sending the form data, it should only be causing the input checkbox value to activate causing it to transfer from the area above into the area below.
- If we are able to activate this event, is their an easy way to have it repeat that 39 times after the initial click instead of having to repeat the code on 39 additional lines? Reason being is I am allowed to select 40 users at 1 time to send the gifted item to.
This is in no way complex or difficult, I just need to figure out the proper way to refer to the check box so it is validated for the click event.
Thanks!
Extended Help Information:
I recorded a video showing what I am doing to better help someone with assisting me. The video can be found at:
http://www.jodriscoll.com/DA:L/iMacroHelp/
- The reason I remove the URL when editing the Macro is because it attempts to load up the game page again and if the game isn't fully loaded then the item I am trying to send out will not be unlocked.
- I removed the Form data because this information changes on a daily basis. Instead of relying on it sending the form data, it should only be causing the input checkbox value to activate causing it to transfer from the area above into the area below.
- If we are able to activate this event, is their an easy way to have it repeat that 39 times after the initial click instead of having to repeat the code on 39 additional lines? Reason being is I am allowed to select 40 users at 1 time to send the gifted item to.
Re: Need some very simple help (new to the tool)
try leaving the FORM=ACTION: in there, but instead of the URL, add a *
if you want the macro to send as well, you either need to make it send to 1 user at a time, or use the scripting interface to select 40 boxes in a loop, then send it once.
also. DONT CHEAT play the game like everyone else...
Code: Select all
FORM=ACTION:*
also. DONT CHEAT play the game like everyone else...
Re: Need some very simple help (new to the tool)
also change CONTENT=NO to CONTENT=YES
and don't double post
and don't double post
-
- Posts: 8
- Joined: Tue Apr 26, 2011 1:48 pm
Re: Need some very simple help (new to the tool)
It isn't cheating my friend. Your tool is used to collect all the gifts we receive and I am trying to make it work with sending out gifts as well. EA2D openly suggests using Macro tools to accept and send gifts when you have friends list greater an 300 (I have 700+).
Also,
I realized I might of post this question in the wrong place, so I relocated it to another section, my apologies.
Also,
I realized I might of post this question in the wrong place, so I relocated it to another section, my apologies.
Re: Need some very simple help (new to the tool)
meh, was having a bad day yesterday, did the advice above fix the problem?
-
- Posts: 8
- Joined: Tue Apr 26, 2011 1:48 pm
Re: Need some very simple help (new to the tool)
I tried this:
Still not selecting any of the check boxes
Code: Select all
VERSION BUILD=7200328 RECORDER=FX
TAB T=1
FRAME F=3
TAG POS=1 TYPE=DIV ATTR=ID:cell14
TAG POS=1 TYPE=INPUT:SUBMIT FORM=ID:giftForm ATTR=VALUE:Proceed<SP>to<SP>Send<SP>>>
TAG POS=1 TYPE=A ATTR=TXT:Dragon<SP>Age<SP>Legends<SP>friends
FRAME F=11
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:* ATTR=ID:ids[] CONTENT=YES
TAG POS=2 TYPE=INPUT:CHECKBOX FORM=ACTION:* ATTR=ID:ids[] CONTENT=YES
TAG POS=1 TYPE=INPUT:BUTTON FORM=ID:* ATTR=NAME:send&&VALUE:Send<SP>Gift<SP>Request
TAG POS=1 TYPE=INPUT:BUTTON ATTR=NAME:sendit&&VALUE:Send
FRAME F=3
TAG POS=1 TYPE=INPUT:BUTTON ATTR=VALUE:Ok
-
- Posts: 8
- Joined: Tue Apr 26, 2011 1:48 pm
Re: Need some very simple help (new to the tool)
Matt,
You should be able to use your Facebook to create a Dragon Age Legends account and try working out the script on the basic item they let you send (which is cell1 instead of my item I am trying to send which is cell14).
http://apps.facebook.com/dragonagelegends/
If you are able to figure this out, you will make hundreds of players very happy
You should be able to use your Facebook to create a Dragon Age Legends account and try working out the script on the basic item they let you send (which is cell1 instead of my item I am trying to send which is cell14).
http://apps.facebook.com/dragonagelegends/
If you are able to figure this out, you will make hundreds of players very happy
-
- Posts: 8
- Joined: Tue Apr 26, 2011 1:48 pm
Re: Need some very simple help (new to the tool)
Matt,
This is the code for each individual user that has a check box. Hopefully this can help you:
I put a star in the value="*" because this field is generated based off the users Facebook ID #.
I've tried doing all the following for trying to call the input box:
Every single one of those shoots this error:
The * being all the following ATTR options listed above (ID:ids[]; NAME:ids[]; CLASS:clearfix; CLASS:inputcheckbox)
Hopefully your knowledge on how this tool works will help me resolve this issue!
Thanks for your help up to this point.
This is the code for each individual user that has a check box. Hopefully this can help you:
Code: Select all
<label class="clearfix"><input type="checkbox" fb_protected="true" value="*" name="ids[]" id="ids[]" class="inputcheckbox "><span>Aidan Lingods</span></label>
I've tried doing all the following for trying to call the input box:
Code: Select all
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:* ATTR=ID:ids[] CONTENT=YES
Code: Select all
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:* ATTR=NAME:ids[] CONTENT=YES
Code: Select all
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:* ATTR=CLASS:clearfix CONTENT=YES
Code: Select all
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:* ATTR=CLASS:inputcheckbox CONTENT=YES
Code: Select all
RuntimeError: element INPUT specified by * was not found, line: 8 (Error code: -921)
Hopefully your knowledge on how this tool works will help me resolve this issue!
Thanks for your help up to this point.
-
- Posts: 8
- Joined: Tue Apr 26, 2011 1:48 pm
Re: Need some very simple help (new to the tool)
Can anyone assist with this? I am willing to pay if someone is able to create something that functions properly.
Re: Need some very simple help (new to the tool)
i'll have a look when i'm at home and can actually access facebook (bloody surfcontrol )
Re: Need some very simple help (new to the tool)
sorry for the delay. here you go:
repeat this line:
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ID:req_form_* ATTR=ID:ids[]&&VALUE:*
to send multiples
Code: Select all
VERSION BUILD=7311339
FRAME NAME=iframe_canvas
TAG POS=1 TYPE=A ATTR=ID:giftTab
FRAME F=5
TAG POS=1 TYPE=IMG FORM=ID:giftForm ATTR=SRC:http://web.dal.int.ea2d.com/images/gifts/consumables/potion_health_small_icon.j*
TAG POS=1 TYPE=INPUT:SUBMIT FORM=ID:giftForm ATTR=CLASS:*
FRAME NAME=fbmlIFrame_0
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ID:req_form_* ATTR=ID:ids[]&&VALUE:*
TAG POS=1 TYPE=INPUT:BUTTON FORM=ID:req_form_* ATTR=CLASS:*
TAG POS=1 TYPE=DIV ATTR=CLASS:dialog_buttons<SP>clearfix
TAG POS=1 TYPE=INPUT:BUTTON ATTR=TYPE:button&&NAME:sendit&&VALUE:Send
FRAME F=5
TAG POS=1 TYPE=INPUT:BUTTON ATTR=CLASS:*
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ID:req_form_* ATTR=ID:ids[]&&VALUE:*
to send multiples
Re: Need some very simple help (new to the tool)
I am having a similar issue.
VERSION BUILD=7601105 RECORDER=FX
TAB T=1
TAB CLOSEALLOTHERS
URL GOTO=http://bannersbroker.com/adpubcombo_man ... ory/rollup
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:?event=rollUp ATTR=ID:27885778 CONTENT=YES
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:?event=rollUp ATTR=ID:27885782 CONTENT=YES
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:?event=rollUp ATTR=ID:27885786 CONTENT=YES
TAG POS=1 TYPE=INPUT:IMAGE FORM=ACTION:?event=rollUp ATTR=ID:submit_button
The macro returns the following error:
RuntimeError: element INPUT specified by ID:27885778 was not found, line: 5 (Error code: -921)
The above should simply check three boxes and then submit them as a rollup.
It does not check the boxes at all.
VERSION BUILD=7601105 RECORDER=FX
TAB T=1
TAB CLOSEALLOTHERS
URL GOTO=http://bannersbroker.com/adpubcombo_man ... ory/rollup
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:?event=rollUp ATTR=ID:27885778 CONTENT=YES
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:?event=rollUp ATTR=ID:27885782 CONTENT=YES
TAG POS=1 TYPE=INPUT:CHECKBOX FORM=ACTION:?event=rollUp ATTR=ID:27885786 CONTENT=YES
TAG POS=1 TYPE=INPUT:IMAGE FORM=ACTION:?event=rollUp ATTR=ID:submit_button
The macro returns the following error:
RuntimeError: element INPUT specified by ID:27885778 was not found, line: 5 (Error code: -921)
The above should simply check three boxes and then submit them as a rollup.
It does not check the boxes at all.