I'm just beginning using iMacros and am confused on how to stop a failed macro. I hope someone can help me figure this out.
I have successfully written some test macros to extract data using scripting with excel VBA. Basically I have a spreadsheet containing the lookup identifiers needed on the web page and the script passes them to the extraction macro and puts the results into the spreadsheet.
Everything works find except occasionally the web site can't find a record matching the identifier I provide and displays some sort of error screen or maybe a pop up. In that case the subsequent TAG commands fails since the error screen doesn't have the matching information. I can detect the failure in the script and everything does function okay but if I have a lot of TAG commands the program is waiting 6 seconds for each TAG command which of course slows things way down if there a lot of failures.
What I really want to happen is for the Macro to stop running and return the failure to the VBA script as soon as the first TAG command fails but I can't find any way to do that. What is the secret???
Stopping a Macro
Forum rules
iMacros EOL - Attention!
The renewal maintenance has officially ended for Progress iMacros effective November 20, 2023 and all versions of iMacros are now considered EOL (End-of-Life). The iMacros products will no longer be supported by Progress (aside from customer license issues), and these forums will also no longer be moderated from the Progress side.
Thank you again for your business and support.
Sincerely,
The Progress Team
Before asking a question or reporting an issue:
1. Please review the list of FAQ's.
2. Use the search box (at the top of each forum page) to see if a similar problem or question has already been addressed.
3. Try searching the iMacros Wiki - it contains the complete iMacros reference as well as plenty of samples and tutorials.
4. We can respond much faster to your posts if you include the following information: CLICK HERE FOR IMPORTANT INFORMATION TO INCLUDE IN YOUR POST
iMacros EOL - Attention!
The renewal maintenance has officially ended for Progress iMacros effective November 20, 2023 and all versions of iMacros are now considered EOL (End-of-Life). The iMacros products will no longer be supported by Progress (aside from customer license issues), and these forums will also no longer be moderated from the Progress side.
Thank you again for your business and support.
Sincerely,
The Progress Team
Before asking a question or reporting an issue:
1. Please review the list of FAQ's.
2. Use the search box (at the top of each forum page) to see if a similar problem or question has already been addressed.
3. Try searching the iMacros Wiki - it contains the complete iMacros reference as well as plenty of samples and tutorials.
4. We can respond much faster to your posts if you include the following information: CLICK HERE FOR IMPORTANT INFORMATION TO INCLUDE IN YOUR POST
-
- Posts: 14
- Joined: Fri Jul 12, 2013 4:54 pm
Re: Stopping a Macro
You can use 2 approaches to deal with this kind of condition:
1) Use 'Set ErrorIgnore Yes'
2) Scrap supporting data for checking
i.e.,)
Get some data from page
Check if data contains "some_value"
if yes
{
good
} else {
not good
}
Likewise, I use to check word 'Captcha' every time before performing a desired action for a site, in case this word was found, I was able to bypass by script to performing matching action.
Hope it helps.
1) Use 'Set ErrorIgnore Yes'
2) Scrap supporting data for checking
i.e.,)
Get some data from page
Check if data contains "some_value"
if yes
{
good
} else {
not good
}
Likewise, I use to check word 'Captcha' every time before performing a desired action for a site, in case this word was found, I was able to bypass by script to performing matching action.
Hope it helps.
Hire the BoT-fReeak!
botspecialist.blogspot.com
botspecialist.blogspot.com